近5年发表论文目录----中国科学院理化技术研究所低温工程学重点实验室

发表论文或著作一览表

序号	论文或专著名称	作者	刊物（出版社）名称	年、卷、期、页
1	Modeling of Multidimensional Freezing Problem During Cryosurgery by the Dual Reciprocity Boundary Element Method	Deng Z.-S., and Liu J.	Engineering Analysis with Boundary Elements	2004，28(2)，97-108
2	Minimally invasive probe system capable of performing both cryosurgery and hyperthermia treatment on target tumor in deep tissues	Liu J., Zhou Y.-X., Yu T.-H., Gui L., Deng Z.-S., and Lv Y.-G.	Minimally Invasive Therapy and Allied Technologies	2004，13，47-57
3	Effect of dendritic cell structure on enhancing oxygen transport in neuron	Lv Y.-G. and Liu J.	Forschung im Ingenieurwesen-Engineering research	2004，68, 155-168
4	Electrical impedance detection to evaluate the viability of biomaterials subject to freezing or thermal injury	Yu T.-H., Liu J., and Zhou Y.-X.	Analytical and Bioanalytical Chemistry	2004，378, 1793-1800
5	Numerical study on 3-D light and heat transport in biological tissues embedded with large blood vessels during laser-induced thermotherapy	Zhou J.-H., and Liu J.	Numerical Heat Transfer, Part A: Applications	2004，45, 415-449
6	Development of a new mini-invasive tumour hyperthermia probe using high-temperature water vapour	Yu T.-H., Zhou Y.-X., Liu J.	Journal of Medical Engineering & Technology	2004，28, 167-177
7	Evidences of stress wave induced in frozen biomaterials by a strong and instantaneous heating	Yu T.-H., Liu J., Zhou Y.-X.	Journal of Thermal Stresses	2004,27, 1089-1100
8	A rate equation approach to model the denaturation or replication behavior of the SARS coronavirus	Liu J.	Forschung im Ingenieurwesen-Engineering research	2004，68, 227-238
9	Numerical Simulation on 3-D Freezing and Heating Problems for the Combined Cryosurgery and Hyperthermia Therapy	Deng Z.-S. and Liu J.	Numerical Heat Transfer, Part A: Applications	2004，46, 587-611
10	New conceptual method for cooling the target biological tissues	Ji Y., and Liu J.	Heat and Mass Transfer	2004，41, 226–238
11	Addition of cryoprotective agent into biological tissue through minimally invasive injection	Gui L., Deng Z.-S., Liu J.	CryoLetters	2004，25, 353-362
12	Monte CarloSimulation of the Effects of Large Blood Vessels during Hyperthermia	Deng Z.-S. and Liu J.	International Symposium on Computational and Information Sciences	2004，3314, 437-442
13	Freeze tweezer to manipulate mini/micro objects	Liu J., Zhou Y. X., Yu T. H.	Journal of Micromechanics and Microengineering	2004, 14, 269-276
14	Ice valve for mini/micro flow channel	Gui L., Liu J.	Journal of Micromechanics and Microengineering	2004, 14, 242-246
15	Computational study on temperature mapping over skin surface and its implementation in disease diagnostics	Deng Z. S., Liu J.	Computers in Biology and Medicine	2004, 34, 495-521
16	Vasculature based model for characterizing oxygen transport in skin tissues	Ji Y., Liu J	Warme-und Stoffubertragung-Heat and Mass Transfer	2004, 40, 627-637
17	New conceptual method for directly cooling the target biological tissues	Ji Y., Liu J.	Warme-und Stoffubertragung-Heat and Mass Transfer	2004, 41(3), 226-238
18	Nucleate pool boiling heat transfer of pure refrigerants and binary mixtures	Sun Z. H., Gong M. Q., Qi Y. F., Li Z. J., Wu J. F.	Journal of Thermal Science	2004, 13(3), 259-263
19	Performances of the mixed-gases Joule-Thomson refrigeration cycles for cooling fixed-temperature heat loads	Gong M. Q., Wu J. F., Luo E. C.	Cryogenics	2004, 44, 847-857
20	The mixing effects for real gases and their mixtures	Gong M. Q., Wu J. F., Luo E. C.	Cryogenics	2004, 44, 741-753
21	Study of the single-stage mixed-gases refrigeration cycle for cooling temperature-distributed heat loads	Gong M. Q., Wu J. F., Luo E. C., Qi Y. F., Zhou Y.	International Journal of Thermal Sciences	2004, 43(1), 31-41
22	Studies on characterization and cryogenic mechanical properties of polyimide-layered silicate nanocomposite films	Zhang Y. H., Wu J. T., Fu S. Y., Yang S. Y., Li Y., Fan L., Li R. K. Y., Li L. F., Yan Q.	Polymer,	2004, 45(22), 7579-7587
23	Design of metal hydride system as a bus air conditioner, Rare Metal Materials and Engineering	Liu H. J., Li G., Li L. F., Qu W. S., Yang K., Shi C. X.	Rare Metal Materials and Engineering	2004, 33, 14
24	Phase space analysis on thermoacoustic heat engine system	Li Z. Y., Wu C., Li Q.	Energy Conversion and Management	2004, 45(14), 2197-2205
25	Properties of gas mixtures and their use in mixed-refrigerant Joule-Thomson refrigerators	Luo E. C., Gong M. Q., Wu J. F., Zhou Y.	Advances in Cryogenic Engineering	2004, 49(B), 1677-1686
26	Inertance tube models and their experimental verification	Luo E. C., Radebaugh R., and Lewis M.	Advances in Cryogenic Engineering	2004, 49 (B), 1485-1492
27	Inertance tube optimization for pulse tube refrigerators	Radebaugh R., Lewis M., Luo E. C., Pfotenhauer J. M., Nellis G. F., Schunk L. A.	Advances in Cryogenic Engineering	2004, 49(B), 1261-1268
28	Inertance tube optimization for kW-class pulse tubes	Schunk L. O., Pfotenhauer1J. M., Nellis G. F., Radebaugh R., Luo E. C.	Advances in Cryogenic Engineering	2004, 49 (B), 1269-1276
29	Study on micro-fluidic ice valve array system	Gui L., Liu J.	The 6th International Symposium on Heat Transfer, Beijing, China	2004,15-19, 242-246
30	Three-dimensional simulation on rapid and uniform electromagnetic rewarming of cryopreserved tissues	Deng Z.-S., and Liu J.	The 6th International Symposium on Heat Transfer, Beijing, China	2004,15-19,562-567
31	Fundamental and practical issues in developing the combined cryosurgery and hyperthermia system for minimally invasive tumor treatment	Liu J.	Annual Meeting of the Society for Cryobiology	2004
32	Analogy between heat and mass transfer leads to new oxygen transport equations in vascularized biological tissues,	Liu J.	2004 ASME International Mechanical Engineering Congress and RD&D Expo,	2004
33	Effects of large blood vessels on temperature distributions during simulated cryosurgery	Deng Z.-S. and Liu J.	2004 ASME International Mechanical Engineering Congress and RD&D Expo,	2004
34	肿瘤热疗计划中三维温度分布的不确定性研究	邓中山，刘静	工程热物理学报	2004，25, 664-666
35	微器件的热学加工技术研究与应用	白晓丹，刘静	微纳电子技术	2004，41(5)，1-12
36	基于肺泡组织耗氧机理研究SARS患者病程发展规律	吕永钢，刘静	北京生物医学工程	2004，23(2)，100-107
37	芯片冷却技术中的微/纳米材料与结构的研究进展	李腾,刘静	微纳电子技术	2004，41(8)，21-27, 37
38	基于肿瘤靶向热疗的磁性微/纳米颗粒研究进展	吕永钢，刘静	微纳电子技术	2004，41(9)，22-28
39	芯片冷却技术的最新研究进展及其评价	李腾,刘静	制冷学报	2004，25(3)，22-32
40	氩氦刀冷冻手术中冻结与复温问题的数值模拟	邓中山，王洪武，刘静	航天医学与医学工程	2004，17(6)，448-451
41	超流氦气液相分离器实验研究	余兴恩，李青，洪国同，李正宇，李强	导弹与航天运载技术	2004, 6, 43-48
42	热声斯特林热机起振过程的动力学分析	李正宇，李青，吴锋，熙，涂虬，郭方中	低温工程	2004, 1, 17-21
43	热声热机网络模型演化与机理初探	陈熙，李青，李正宇，郭方中	低温工程	2004, 1, 27-31
44	混合型热声发动机中两个模态的特性对比研究	禹智斌，李青，陈熙，谢秀娟	低温工程	2004, 2, 36-40
45	超流氦气液相分离器实验装置研制	洪国同，余兴恩，李正宇，杨健慧，李强，李青	低温工程	2004, 3, 1-5
46	热声热机的频率特性研究	张富珍，姜任秋，李青，陈熙，禹智斌	低温工程	2004, 4, 41-45
47	车载液氢杜瓦蒸发率理论与试验研究	聂中山，李青，洪国同，余兴恩	低温工程	2004, 4, 55-58
48	热声系统中的回热器声学特性的理论及实验研究	谢秀娟，李青，禹智斌	低温工程	2004, 6, 33-37
49	交变流动热机的介观热力学理论，第一部分：制冷机回热器的介观热力循环模型及分析	罗二仓，戴巍，吴张华，吴剑峰	低温工程	2004, 1，1-11
50	交变流动热机的介观热力学理论，第二部分：发动机回热器的介观热力循环模型及分析	罗二仓，戴巍，吴张华，吴剑峰	低温工程	2004, 2，1-10
51	低温绝热材料热导率测试装置	喻力弘,林鹏,张庆庚,张亮	低温工程	2004, 139, 27-30
52	车载液氢杜瓦蒸发率理论与实验研究	聂中山,李青等	低温工程,	2004, .4, 55-58
53	10米10.5kV/1.5kA三项交流高温超导电缆液氮冷却系统的设计	范宇峰,龚领会,徐向东,李来风,张亮,肖立业	低温工程	2004, 2, 27-29
54	高温超导电缆低温系统数据实时监控	范宇峰,徐向东,龚领会,李来风,张亮	低温工程	2004, 5, 26-30
55	陶瓷材料在G-M制冷机中的应用	苏小陶,方志春,龚领会,陆文海,张亮,李来风	低温工程	2004, .6, 24
56	半导体热电制冷研究进展	刘华军,李刚,李来风	低温工程	2004, 1, 32-38
57	沸腾两相流动中的动力学特征量	李正宇，李青，郭方中	热科学与技术	2004, 3(1), 43-46
58	管内沸腾两相流动网络模型	李正宇，李青，郭方中	华中科技大学学报（自然科学版）	2004, 32(3), 17-19
59	最新低温治疗技术的研究进展及其评价	于天骅，刘静	中国医疗器械杂志	2004, 28, 350-355
60	光网络开关中的微热学控制技术研究与应用	曲小鹏，刘静	激光与红外	2004, 34(6), 403-407
61	低温容器有限元分析网格自动划分	聂中山,李青	低温与特气	2004, 22(2), 13-17
62	基于传递矩阵法的热声发动机频率设计计算	禹智斌，李青，陈熙，涂虬，谢秀娟	低温与超导	2004, 32(2), 9-14
63	BESIII低温系统的预设计	刘立强,梁文清,龚领会,张亮等	低温与超导	2004, 32(1), 22-31
64	高温超导MRI磁体试验样机的设计	韩跃,陈浩树,张超骥,任瑛,刘立强	低温与超导	2004, 32(4), 26-28
65	高效室温行波热声制冷机的研究（第一部分:方案及热力分析）	黄云,罗二仓,吴张华,戴巍,凌虹,李晓明	低温与超导	2004, 32(1), 1-4
66	高效室温行波热声制冷机的研究（第二部分:电声压缩机驱动的行波热声制冷机的实验研究）	黄云,罗二仓,吴张华,戴巍,李晓明,	低温与超导	2004, 32(3), 1-4
67	行波热声发动机起振温差的研究	胡剑英,罗二仓,凌虹	低温与超导	2004, 32(2), 64-67
68	焊接波纹管在热声机械中的应用	胡剑英,罗二仓,吴张华,戴巍	低温与超导	2004, 32(3), 39-42
69	混合工质在制冷机节流元件毛细管中的流动特性	齐延峰,公茂琼,孙兆虎,罗二仓,吴剑峰	天然气工业	2004, 12, 139-141
70	一种基于深冷混合工质节流制冷机的高真空水汽捕集器	公茂琼,吴剑峰,胡勤国	真空与低温	2004, 10(4), 193-197
71	《SARS医学中的物理热学方法与应用》	刘静	科学出版社	2004
72	Selective freezing of target biological tissues after injection of solutions with specific thermal properties	Yu T.-H., Liu J., Zhou Y.-X.	Cryobiology	2005, 50, 174-182
73	Numerical simulation of selective freezing of target biological tissues following injection of solutions with specific thermal properties	Deng Z.-S., Liu J.	Cryobiology	2005, 50, 183-192
74	Numerical study on a cooling strategy for a boiling-saline-based tumor hyperthermic injector	Gui L., and Liu J.	Heat Transfer Engineering	2005, 26, 51-64
75	Study on the thawing process of biological tissue induced by laser irradiation	Zhou J. H., Liu J., and Yu A. B.	ASME Journal of Biomechanical Engineering	2005, 127, 416-431
76	Interpretation on thermal comfort mechanisms of human bodies by combining Hodgkin-Huxley neuron model and Pennes bioheat equation	Lv Y. G. and Liu J.	Forschung im Ingenieurwesen-Engineering research	2005, 69, 101-114
77	Study on the Heat and Fluid Transport inside the Biological Tissues Subject to Boiling Saline-Based Tumor Hyperthermic Injection	L. Gui, J. Liu	Heat Transfer Engineering	2005, 26, 9, 73-84
78	3-D numerical study on the induced heating effects of embedded micro/nano particles on human body subject to external medical electromagnetic field	Y.-G. Lv, Z.-S. Deng, and J. Liu	IEEE Transactions on NanoBioscience	2005, 4, 284-294
79	Animal test on infrared image guided percutaneous hot saline injection therapy	L. Gui, and J. Liu	Minimally invasive therapy and allied technologies	2005, 14, 339-344
80	Synthesis and cryogenic properties of polyimide–silica hybrid films by sol–gel process	Yi-He Zhang, Yan Li, Shao-Yun Fu, John H. Xin, Walid A. Daoud and Lai-Feng Li.	Polymer	2005, 46 (19), 8373-8378
81	Cryogenic properties of SiO2/epoxy nanocomposites	Chuan-Jun Huang, Shao-Yun Fu, Yi-He Zhang, Bernd Lauke, Lai-Feng Li and Lin Ye	Cryogenics	2005, 45, 450-454
82	Experimental investigation on a thermoacoustic engine having a looped tube and resonator	Yu Zhibin, Li Qing, Chen Xi, Guo Fangzhong, Xie Xiujuan	Cryogenics	2005, 45(8), 566-571
83	Improving efficiency of thermoacoustic driven pulse tube using an elastic membrane	Hu JY, Luo EC, Dai W	Cryogenics,	2005, 45, 469-528
84	Cryogenic system with the sub-cooled liquid nitrogen for cooling HTS power cable	Fan Y. F., Gong L. H., Xu X. D., Li L. F., Zhang L., Xiao L. Y.	Cryogenics	2005, 45, 272
85	Investigation of polyimide–mica hybrid films for cryogenic applications.	Yi-He Zhang, Shao-Yun Fu, Robert K.-Y. Li, Jun-Tao Wu, Lai-Feng Li, Jun-Hui Ji and Shi-Yong Yang	Compos Sci Technol.	2005, 65, 1743-1748.
86	Mechanical and electrical properties of polyimide nanocomposite films at cryogenic temperature	Yi-He Zhang, R.K.Y Li, S-Y Fu, J-T Wu, Y-Q Li，Z-M Dang, S-Y Yang	Materials Science Forum	2005, 475-479, 1073-1076
87	Novel silica tube/polyimide composite films with variable low dielectric constant	Y.H.Zhang, S.G. Lu, Y.Q. Li, Z.M. Dang, J. Xin, S.Y. Fu, G.T. Li, R.R. Guo, L.F. Li,	Advanced Materials	2005, 17, 1056-1059
88	Dielectric properties of polyimide-mica hybrid films	Y.H.Zhang, Z.M. Dang, J. Xin, D. Walid, J.H. Ji, Y.Y. Liu, Y.Q. Li, J.T.Wu, S.Y. Yang, L.F.Li	Macromolecular Rapid Communications	2005, 26, 1473-1477
89	Synthesis and cryogenic properties of polyimide-silica hybrid films by sol-gel process	Y.H. Zhang, Y. Li, S.Y. Fu, J. Xin, W. Daoud, L.F. Li	Polymer	2005, 46(19), 8373-8378
90	Dielectric and dynamic mechanical properties of polyimide-clay nanocomposite films	Y.H.Zhang, Z.M. Dang, S.Y. Fu, J. Xin, J.G. Deng, J.T. Wu, S.Y. Yang, L.F. Li, Q.Yan	Chemical Physics Letters	2005, 401, 553-557
91	Investigation of polyimide-mica hybrid films for cryogenic applications	Y.H.Zhang, S.Y. Fu, R. Li, J.T. Wu, L.F. Li,, J.H.Ji, S.Y. Yang	Composites Science and Technology	2005, 65, 1743-1748
92	Theoretical calculation and experimental investigation on acoustic characteristics of regenerator in the thermoacoustic apparatus	Li Qing, Yu Zhibin	Heat Transfer-Asian Research	2005, 34, 539-546
93	Numerical analysis of the final cooldown of a 3.3 km sector of the Large Hadron Collider	L. Liu, G. Riddone, and L. Tavian	Advances in Cryogenic Engineering	2005，51，547-554
94	A heat-driven thermoacoustic refrigerator capable of achieving below liquid nitrogen temperature	Dai W, Luo EC, Hu JY, Ling H	Applied Physics Letters	2005, 86, 224103
95	A high pressure-ratio, energy-focused thermoacoustic heat engine with a tapered resonator	Luo EC, Ling H, Dai W, Zhang Y	Chinese Science Bulletin	2005, 50, 284-286
96	A high-performance thermoacoustic refrigerator operating in room-temperature range	Luo EC, Huang Y, Dai W, Zhang Y, Wu ZH	Chinese Science Bulletin	2005, 50, 2662-2664
97	A thermoacoustically driven, non-moving-part cooler capable of reaching temperature below 77 K.	Dai W, Luo EC, Ling H, Hu JY	Chinese Science Bulletin	2005, 50, 383-384
98	A novel coupling configuration for thermoacoustically-driven pulse tube coolers: Acoustic amplifier	Dai W, Luo EC, Hu JY，ChenYY	Chinese Science Bulletin	2005, 50, 2112-2114
99	A New Angle of View For Understanding and Evaluating Flow Characteristics of Cyclic Regenerators	Luo E., Dai W., Radebaugh R	Cryocoolers	2005,13, 431-438
100	Building a high-efficiency and compact-sized thermoacoustically-driven pulse tube cooler	W.Dai, E. Luo	Cryocoolers	2005,13, 195-200
101	A traveling-wave thermoacoustic refrigerator within room-temperature range	Yun Huang, Ercang Luo, Zhanghua Wu	Cryocoolers	2005,13, 189-194
102	Numerical study on the thawing process of biological tissue induced by laser irradiation	Zhou J. H., Liu J., Yu A. B.	ASME Journal of Biomechanical Engineering	2005, 127, 416-431
103	Vapor-liquid equilibrium measurements for the ethane +hexafluoroethane system over a temperature range from (199.64 to 242.93) K	Zhang Y., Gong M. Q., Zhu H. B., Wu J. F.	Journal of Chemical and Engineering Data	2005, 50(6), 2074-2076
104	Numerical research on a special fluid phenomenon-ranque-hilsch effect	Liu J. Y., Gong M. Q., Zhang Y., Hong H., Wu J. F.	Modern Physics Letters B	2005, 19, 1723-1726
105	Effect of rotary-die equal channel angular pressing on the thermoelectric properties of a (Bi,Sb)2Te3 alloy	Sun Z. M., Hashimoto H., Keawprak N., Ma A. B., Li L. F., Barsoum M. W.,	Journal of Materials Research	2005, 20, 895
106	Enhancement of Thermal Diagnostics on Tumors Underneath the Skin by Induced Evaporation	Deng Z.-S., Liu J.	27th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBS)	2005, 7525-7528
107	Effect of Configuration Between Cryoprobe and Large Blood Vessels on the Tissue Freezing During Cryosurgery	Deng Z.-S., Liu J.	27th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBS)	2005,490 - 493
108	Infrared image to evaluate the selective (directional) freezing due to localized injection of thermally important solutions	Yan J. F., Liu J., Zhou Y.-X.	27th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBS)	2005,3559 - 3562
109	Capacity of Brain Cooling Via Ventilating Oxygen at Low Temperature Over Respiratory Tract	Lv Y.-G., Liu J.	27th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBS)	2005,6793 - 6796
110	Temperature nonuniformity during applying dynamics infrared thermography for tumor detection: impact of large vessels	Z.-S. Deng, and J. Liu	2005 ASME International Mechanical Engineering Congress and RD&D Expo	2005, 80192
111	Numerical evaluation on the heat dissipation capability of liquid metal based chip cooling device	Z.-S. Deng, and J. Liu	2005 ASME International Mechanical Engineering Congress and RD&D Expo	2005
112	Liquid metal based miniaturized chip-cooling device driven by electromagnetic pump	J. Liu, Y.-X. Zhou, Y.-G. Lv, and T. Li	2005 ASME International Mechanical Engineering Congress and RD&D Expo	2005
113	Study of skin burns due to contact with cold mediums at extremely low temperature	Deng Z-S., Liu J.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005
114	Study on electricity generation performance of thermoelectric device in extreme environmental conditions	Wu Z-L., Zhou Y-X., Li T., Liu J.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005
115	A new method for uniformly cooling engineered tissues	Yu L-N., Deng Z-S., Liu J., Zhou Y-X.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005
116	The Cryogenic System of BESIII in Preliminary Design	Liu L., Zhu Z., Han S., Makida Y., Yamaoka H., Tsuchiya K., Liang W., Gong L.，Zhang L.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 39-42
117	Thermal Design of BESIII Magnet	Xu Q., Zhu Z. , Liu L., Wang S., Yi C., Chen H., Zhang L.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 601-604
118	Investigation of a Single-Stage G-M Refrigerator with High Cooling Capacity for HTS Devices	Z. Fang, X. Su, L. Liu, L. Gong	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 153-156
119	Preliminary study on GM refrigerator with heat Exchanger	Liang W., Gong L., Zhang L	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 157-160
120	Numerical study of the final cooldown from 4.5 K to 1.9 K of the Large Hadron Collider	G. Riddone, L. Liu, L. Tavian	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 1007-1010
121	Development of cryogenic structural materials	Li, L.F., Zhang, Y.T., Li, Y.Y.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 885-894
122	Basic operation principle of a novel cascade thermoacoustic prime mover	Luo E., Dai W., Ling H	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005，317-320
123	New perspective on thermodynamic cycles of oscillating flow regenerators	Luo E., Dai W., Radebaugh R.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 337-340
124	Characteristics of a miniature pulse tube cooler driven by thermoacoustic standing wave engine	Wei Dai, Ercang Luo, Yuan Zhou, Wenxiu Zhu	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 309-312
125	Thermoacoustic turbulent-flow model for inertance tubes used for pulse tube refrigerators	Luo E., Radebaugh R., Dai W., Lewis M., Wu Z., Zhang Y.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 383-386
126	Initial test on thermoacoustic traveling-wave refrigerator	Huang Y., Luo E., Dai W.，Wu Z	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 341-344
127	Numerical simulation on a novel cascade thermoacoustic prime mover	Ling H., Luo E., Dai W., Li X.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 333-336
128	Study on A Linear Compressor with Metal-bellows	Wu Z., Luo E., Dai W., Hu J.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 321-324
129	An analytical model for onset temperature difference of thermoacoustic Stirling prime movers	Hu J., Luo E., Ling H.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 325-328
130	Two-dimensional numerical simulation of the inertance tube	Zhang Y., Luo E., Dai W.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 329-322
131	Test results and analysis of cryogenic system for cooling HTS cables and the next stage plan	Fan Y.-F., Gong L.-H., Xu X.-D., Li L.-F., Zhang L., Xiao L.-Y.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 71-74
132	Use of ceramic part in G-M refrigerator	Su X.-T., Fang Z.-C., Gong L.-H., Li L.-F.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 213-216
133	Properties of thermoelectric device with (BixSb1-x)2(TeySe1-y)3 materials	Liu H.-J., Li G., Li L.-F.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 185-188
134	Experimental investigation on pool boiling heat transfer of pure refrigerants and binary mixtures,	Sun Z. H., Gong M. Q., Qi Y. F., Luo E. C., Wu J. F.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 821-824
135	A 70 K J-T cryocooler based on the fractional mixed-refrigerant cycle	Gong M. Q., Wu J. F.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 173-176
136	Performance of different throttle refrigeration cycles, the 20th International Cryogenic Engineer Conference	Gong M. Q., Wu J. F.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 169-172
137	Development of a cryogenic water-trap based on the recuperative mixture refrigeration cycles	Gong M. Q., Wu J. F., Hu Q. G.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 177-180
138	Dimensional analysis on multi-component mixed-refrigerants flow characteristics in adiabatic capillary tube	Qi Y. F., Gong M. Q., Sun Z. H., Luo E.C., Wu J. F.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 161-164
139	An experimental research on a small flow vortex tube at low temperature ranges	Liu J. Y., Gong M. Q., Wu J., Cao F., Y., Luo E. C.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 165-168
140	Numerical study of the final cooldown from 4.5 K to 1.9 K of the large Hadron collider	Riddone G., Liu L., Tavian L.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 1007-1010,
141	The BESIII detector magnet	Zhu Z., Liu L., et al.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 593-596
142	Thermal design of BESIII magnet	Xu Q., Zhu Z., Liu L., Zhao L.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 601-604
143	Investigation of a single-stage G-M refrigerator with high cooling capacity for HTS devices	Fang Z., Su X., Liu L., Gong L., et al.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 153-156
144	Study on the optimal characteristic dimension of regenerator in a thermoacoustic engine	Yu Z. B., Li Q.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 357-360
145	Experimental investigation on dynamic evolvement of thermoacoustic system and parameter of regenerator	Chen X., Li Q., Li Z. Y.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 313-316
146	Experimental investigation on He II porous plug liquid-vapor phase separator	Yu X. E., Li Q., Li Q., Li Z. Y.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 405-408
147	Investigation on Acoustic Characteristics of Regenerator in the Thermoacoustic Apparatus	Xie X. J., Li Q., Chen X., Yu Z. B.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 361-364
148	Stack and frequency’s coupling characteristic analysis in the thermoacoustic systems	Zhang F. Z., Jiang R. Q., Li Q., Chen X.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 349-352
149	Numerical simulation of loudspeaker-driven thermoacoustic refrigerator	Tu Q., Chen Z. J., Liu J. X., Zhang X. Q., Li Q., Guo F. Z.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 353-356
150	Temperature effects on formation of a uniform layer of isotopes inside a cryogenic ICF target	Zhou G., Zhu Y. Q., Liu Y., Jiang C., Li Q.	Proceedings of the 20th International Cryogenic Engineering Conference (ICEC20)	2005, 737-740
151	Development of new generation miniaturized chip-cooling device using metal with low melting point or its alloy as the cooling fluid	Liu J.	Proceedings of the International Conference on Micro Energy Systems	2005, 89-97
152	Three dimensional computerized planning/evaluating of multi-probe cryosurgery for irregularly shaped tumor	Deng Z. S., Liu J., and Wang H. W.	The 2nd International Symposium on Thermal Science and Engineering,	2005
153	操纵微小世界的工具—微/纳米镊的研究与应用	刘静	微纳电子技术	2005, 42, 97-106, 122
154	生物体多尺度热学响应问题的研究与应用	吕永钢，刘静	应用基础与工程科学学报	2005, 13, 162-179
155	同位素燃料驱动型MEMS热电动力芯片的传热和能量转换效率问题研究	白晓丹，刘静	工程热物理学报	2005, 25, 826-828
156	SARS病毒攻击肺泡组织的耗氧机理研究	吕永钢，刘静	工程热物理学报	2005,26(1),119-121
157	热驱动室温行波热声制冷机的实验研究	黄云，罗二仓，戴巍，张泳，吴张华，胡剑英，吴剑峰	工程热物理学报	2005, 26(2), 199-201
158	改进型驻波热声发动机的实验研究	戴巍，罗二仓，胡剑英，张泳，吴张华，黄云	工程热物理学报	2005, 26(3), 376-378
159	高效率电磁驱动直线压缩机的研究	吴张华，罗二仓，戴巍，胡剑英	工程热物理学报	2005, 26(3), 435-437
160	液氮温区热声驱动脉管制冷机的研究	罗二仓,戴巍,胡剑英,吴张华,黄云,张泳,周远	工程热物理学报	2005, 26, Suppl.,33-36
161	实际气体的混合制冷效应及其应用探讨	公茂琼,吴剑峰	工程热物理学报	2005, 26(6), 905-908
162	基于神经元电响应的人体热舒适性评价理论	吕永钢，刘静	工程热物理学报	2005, 26, 504-506
163	突破生物材料低温保存技术瓶颈的仿生学途径评价	于丽娜，刘静	科技导报	2005,23, 69-72
164	回热器参数与热声系统动态特性的实验研究	陈熙，李青，席有民，李正宇，禹智斌，谢秀娟	低温工程	2005, 2, 32-38
165	超流氦相分离器实验装置降温过程仿真与实验结果	余兴恩，李青，李强，李正宇	低温工程	2005, 2, 32-38，6-10
166	低温加工技术及其发展现状分析	白晓丹，刘静	低温工程	2005, 25-29
167	利用永磁体的室温磁制冷机性能研究	姚冠辉,栗鹏,公茂琼,吴剑峰	低温工程	2005, 6, 42-44
168	两种立方型状态方程相平衡推算中相互作用系数的研究进展	朱洪波,公茂琼,张宇,吴剑峰	低温工程	2005, 5, 7-12
169	一种提高热声发动机压比的声学“变压器”	胡剑英,罗二仓,戴巍,吴张华	低温工程	2005, 5, 26-29
170	脉冲管制冷机系统Gedeon直流的损失评估	戴巍,罗二仓	低温工程	2005, 2, 24-27
171	Bi0.90Sb0.10热电材料高压制备及性能研究	宋春梅,刘华军,吴云龙,教晓冬,黄荣进,王宏,李来风	低温工程	2005, 148, 20-23
172	制冷机直接冷却高温超导磁体电流引线优化设计	范宇峰,龚领会,张亮,李来风	低温工程	2005, 147, 17-21
173	热声系统中回热器特征阻抗与传播常数的研究	谢秀娟，李青，陈熙，禹智斌	低温与超导	2005, 33(1), 32-35
174	热驱动谐振管回热器的时变数学模型	陈熙，李青，郭方中	低温与超导	2005, 33(2), 30-34
175	多元混合物池内核态沸腾换热关联式研究进展	李志坚,孙兆虎,公茂琼,吴剑峰	低温与超导	2005, 33(3), 1-5
176	非线性热声理论的研究进展	胡剑英,罗二仓	低温与超导	2005, 33(3), 11-16
177	四分之一波长锥形管共振频率的研究	张泳,罗二仓,戴巍	低温与超导	2005, 33(4), 41-48
178	二阶非线性热声理论模型研究	李晓明,陈国邦,罗二仓	低温与超导	2005, 33(4), 41-48
179	同轴型热虹吸系统轴向传热特性实验研究	杨健慧，李青，卢文强，李正宇，李强，周远	原子能科学技术	2005, 39(1), 11-17
180	气冷电流引线气流不均衡分配条件下运行参数研究	徐庆金，朱自安，刘立强等	低温物理学报	2005, 5, 1023-1028
181	低温大样品线胀系数测试	喻力弘,林鹏,张庆庚,张亮	低温物理学报，	2005, 27, 91-96
182	感染性发热时三维脑组织热臃塞问题的理论研究	吕永钢，刘静	中国生物医学工程学报	2005, 24, 206-211
183	生物质燃料电池的研究进展	吴祖林，刘静	电源技术	2005, 29, 333-340
184	高性能室温行波热声制冷机	罗二仓,黄云,戴巍,张泳,吴张华	科学通报	2005, 50(2), 192-194
185	采用锥形谐振管的高压比聚能型热声发动机	罗二仓,凌虹,戴巍,张泳	科学通报	2005, 50(6), 605-607
186	突破液氮温度的完全无运动部件热声制冷机	戴巍,罗二仓,胡剑英	科学通报	2005, 50(5), 498-499
187	用于热声驱动脉冲管制冷机的新耦合机构,声学放大器	戴巍,罗二仓,胡剑英,陈燕燕	科学通报	2005, 50(19), 2178-2179
188	一种大幅度提高热声发动机输出压比的“声学泵”	罗二仓,胡剑英,戴巍,陈燕燕	科学通报	2005, 50(17), 1926-2928
189	串级热声发动机的机理分析及数值模拟	凌虹,罗二仓,戴巍,吴张华	应用声学	2005, 24(2), 1-6
190	多元非共沸混合物池内核态沸腾传热实验研究	李志坚,孙兆虎,公茂琼,吴剑峰	真空与低温	2005, 11(2), 90-97
191	采用永磁铁的室温磁制冷机实验研究	栗鹏,姚冠辉,公茂琼,吴剑峰	稀有金属	2005, 29(4), 587-589
192	吴剑峰,主动式磁回热器的理论分析	栗鹏,姚冠辉,公茂琼,吴剑峰	稀有金属	2005, 29(4), 578-583
193	金属氢化物热泵空调研究进展	李刚,刘华军,李来风	制冷学报	2005, 26, 1-7
194	10米10．5kV／1．5kA三相交流高温超导电缆低温系统	范宇峰,龚领会,徐向东,李来风,张亮,肖立业	制冷学报	2005, 26, 49-53
195	75米三相交流高温超导电缆冷却系统	范宇峰,龚领会,徐向东,张亮,吴江,李来风,肖立业	低温物理学报	2005, 27(5), 1068-1072
196	金属与非金属蓄冷器交变流动阻力特性对比实验	王希龙,党海政,蔡京辉,梁惊涛,周远	中国科学院研究生院学报	2005, 22(4), 506-510
197	热流体消融技术，《现代肿瘤靶向治疗技术》	刘静，王洪武主编	北京：中国医药科技出版社	2005，255-265
198	肿瘤低温冷冻过程中的监测技术，《现代肿瘤靶向治疗技术》	刘静，王洪武	北京：中国医药科技出版社	2005，131-142
199	Numerical study on the effects of large blood vessels on 3-D tissue temperature profiles during cryosurgery	Deng Z. S., Liu J	Numerical Heat Transfer, Part A: Applications	2006,49, 47-67
200	Simulation of delivering oxygen directly to the target tissues by injection	Gui L., Liu J.	International Journal of Thermal Sciences	2006,45, 528-535
201	Modeling of transdermal drug delivery with a microneedle array	Lv Y. G., Liu J., Gao Y. H., Xu B.	Journal of Micromechanics and Microengineering	2006,16, 2492-2501
202	Theoretical evaluation on burn injury of human respiratory tract due to inhalation of hot gas at the early stage of fires	Lv Y. G., Liu J., Zhang J.	Burns	2006,32, 436-444
203	A powerful way of cooling computer chip using liquid metal with low melting point as the cooling fluid	Li T., Lv Y. G., Liu J., Zhou Y. X.	Forschung im Ingenieurwesen	2006,70, 243-251
204	High-Pressure Preparation and Thermoelectric Properties of Bi0.85Sb0.15	H.J. Liu, L.F. LI, and D.G.. Shi	J. Elec. Materials	2006，35，7-10
205	Thermoelectric properties of Bi0.9Sb0.1 prepared by high pressure	H.J. Liu, Y.L. Wu , R.J. Huang, C.M. Song , L.F. Li	J. of Physics and Chemistry of Solids	2006，67, 1492-1495.
206	A high frequency cascade thermoacoustic engine	Zhong Jun Hu, Qing Li, Qiang Li, Zheng Yu Li	Cryogenics,	2006, 46(11), 771–777，
207	Study on Unsymmetrical Phenomena of Vapor Cooled Current Leads	Q. J. Xu, Z. A. Zhu, L. Q. Liu, Z. G. Zong, S. K. Huang, C. L. Yi, L. Zhang	Cryogenics	2006, 46(9)，676-682
208	Comparison of two different ways of using inertance tube in a pulse tube cooler	Wei Dai, Jianying Hu, Ercang Luo	Cryogenics	2006, 46(4), 273-277
209	A simple method to determine the frequency of engine-included thermoacoustic systems	W. Dai, E. Luo and G. Yu	Cryogenics	2006, 46(11), 804-808
210	Design and experiment on a mini cascade thermoacoustic engine	Hu Z. J., Li Q., Xie X. J., Zhou G., Li Qiang	Ultrasonic	2006, 44, , 1515-1517，
211	Investigation on the different types of resonators in the thermoacoustic stirling prime mover	Xie Xiujuan, Li Qing, Li Zheyu, Li Qiang	Ultrasonic	2006, 44, 1503-1505,
212	A numerical simulation method and analysis of a complete thermoacoustic-Stirling engine	Ling H, Luo EC, Dai W	Ultrasonics	2006, 44, 1511-1514
213	Thermoacoustically refrigerator with double thermoacoustic-Stirling cycles	Ercang Luo, Wei Dai, Yong Zhang, and Hong Ling	Applied Physics Letters	2006, 88, 074102(1-3)
214	An acoustical pump capable of significantly increasing pressure ratio of thermoacoustic heat engines	Luo Ercang, Hu Jianying, Dai Wei, and Chen Yanyan	Chin Sci Bull	2006, 51, (8), 1014-1016
215	Detailed study of a traveling wave thermoacoustic refrigerator driven by a traveling wave thermoacoustic engine	Wei Dai, Ercang Luo, Yong Zhang, and Hong Ling	Journal of Acoustical Society of America	2006, 119(5), 2686-2692
216	Experimental study of the influence of different resonators on thermoacoustic conversion performance of a thermoacoustic-Stirling heat engine	E.C.Luo, H.Ling, W.Dai, and G.Y.Yu	Ultrasonics	2006, 44, 1507-1509
217	Experimental investigation of a thermoacoustic-Stirling refrigerator driven by a thermoacoustic-Stirling heat engine	E.C.Luo,W.Dai, Y.Zhang, and H.ling	Ultrasonics	2006, 44, 1531-1533
218	Experimental investigation of a traveling-wave refrigerator	Luo EC, Dai W, Zhang Y, Ling H	Advances In Cryogenic Engineering	2006, 51 (B), 1123-1130
219	Clarification of some important issues in basic thermoacoustic theory	Dai W, Luo E	Advances in cryogenic engineering	2006, 51(B), 1139-1147
220	Thermoacoustically driven pulse tube coolers with acoustic amplifiers	Hu JY, Dai W, Luo EC	Advances in cryogenic engineering	2006, 51 (B), 1564-1571
221	Experimental study of linear compressor driven traveling-wave thermoacoustic refrigerator	Wu Z, Luo E, Dai W, Yu G	Advances in Cryogenic Engineering	2006, 51 (B), 1131-1138
222	Cryogenic system for 75M three-phase AC HTS cable	Fan Y. F., Gong L. H., Xu X. D., Li L. F.	Advances in Cryogenic Engineering,	2006, 824, 798-803
223	Mechanical properties of low density alloys at cryogenic temperatures	Jiao X.-D., Li L. F., Liu H.-J	Advances in Cryogenic Engineering,	2006, 824, 69-76
224	Numerical analysis and experimental study on natural convection in the sample enclosure cooled by a G-M refrigerator	Fang Z. C., Gong L. H., Xu X. D., Li L. F	Advances in Cryogenic Engineering,	2006, 823, 164-170
225	Thermoelectric properties of Bi0.85Sb0.15 alloys prepared by high press method	Liu H.-J., Li L.-F.	Advances in Cryogenic Engineering,	2006, 824, 43-50
226	Effect of resonance tube shape on performance of thermoacoustic engine	Li X., Ling H., Dai W., Luo E., Chen G., Chen Y., Tang K.	Advances in Cryogenic Engineering,	2006, 51(B), 1109-1114
227	Solubility measurements of 1,1,1,2-tetrafluoroethane (R134a) and propane in squalane at temperatures from (325 to 400) K and pressures from (0.1 to 1) MPa	Hong H., Gong M. Q., Wu J. F.	Journal of Chemical and Engineering Data	2006, 51(6), 2270-2273
228	Vapor-liquid equilibrium measurements and correlations for an azeotropic mixture of ethane + hexafluoroethane	Zhang Y., Gong M. Q., Zhu H. B., Wu J. F.	Fluid Phase Equilibria	2006, 240 (1), 73-76
229	Vapor-liquid equilibrium data for the ethane + trifluoromethane system at temperatures from (188.31 to 243.76) K	Zhang Y., Gong M. Q., Zhu H. B., Wu J. F.	Journal of Chemical and Engineering Data	2006, 51(4), 1411-1414
230	Isothermal vapor-liquid equilibrium data for the binary system tetrafluoromethane+ethane over a temperature range from (179.68 to 210.03) K	Zhu H. B., Gong M. Q., Zhang Y., Wu J. F.	Journal of Chemical and Engineering Data	2006, 51(4), 1201-1204
231	A Practical model for analysis of active magnetic regenerative refrigerators for room temperature applications	Li P., Gong M. Q., Yao G. H., Wu J. F.	International Journal of Refrigeration	2006, 29(8), 1259-1266
232	Experimental study on the performance of a room temperature magnetic refrigerator using permanent magnets	YaoG. H., Gong M. Q., Wu J. F.	International Journal of Refrigeration	2006, 29(8), 1267-1273
233	Modulus study of microcracks in single domain YBa2Cu3Ox with c-axis pressure during oxygen anneal	Shi D. , Chaud X., Odier P., Sulpice A., Isfort D. , Tournier R., Guo Y., He P., Guo L., Li L. F., Singh R.	Physica C	2006, 443, 18-22.
234	Effect of selenium doping on superconductivity in high-pressure synthesis T’ structure Sm1.85Ce0.15CuO4	Wu Y. L., Xiong Y. F., Li L. F.	Physica C	2006, 434, 157-160
235	In situ high temperature optical microscopy study of phase evolution in YBa2Cu3O7-x films prepared by a fluorine-free sol-gel route	Zhang Y. L., Yao X., Lian J., Wang L. M., Li A. H., Liu H. K., Yao H. B., Han Z. H., Li L. F., Xu Y. L., Shi D. L.	Physica C	2006, 436, 62-67
236	Composition Shift of a Mixed-Gas Joule-Thomson Refrigerator Driven by an Oil-Free Compressor	Gong M. Q., Deng Z. B., Wu J. F.	Cryocoolers	2006,14, 45-458
237	Micro/nano devices and systems inspired from the concept of ice crystal formation	Liu J.	International Heat Transfer Conferences IHTC-13	2006
238	Complex flow and heat transfer behavior of micro/nano fluidics: Bernard convection always occurs in a NEMS world	Yang Y., Liu J.	2006 IEEE International Conference on Nano/Micro Engineered and Molecular Systems	2006,447
239	Capacity evaluation of a MEMS based micro cooling device using liquid metal as coolant	Deng Z.-S. and Liu J.	2006 IEEE International Conference on Nano/Micro Engineered and Molecular Systems	2006,487
240	Uncertainties in the micro/nano-particles induced hyperthermia treatment on tumor subject to external EM field	Deng Z.-S. and Liu J.	2006 IEEE International Conference on Nano/Micro Engineered and Molecular Systems	2006,307
241	Nano thermal hydrodynamics in the gap of a cell membrane	Yang Y. and Liu J.	Proceedings of BIO2006, 2006 Summer Bioengineering Conference	2006
242	Investigation on the complex 3-D heat transfer problems for the combined cryosurgery and hyperthermia therapy with multiple freeze-heating cycles	Deng Z. S., Liu J.	Proceedings of BIO2006, 2006 Summer Bioengineering Conference	2006, 157193
243	Study on the enhancement of RF ablation by introducing adjuvants of saline solution or magnetic micro/nano particles	Deng Z. S., Liu J	Proceedings of BIO2006, 2006 Summer Bioengineering Conference	2006
244	Evaluation on laser beam assisted infrared thermal diagnosis of superficial circulation disease	Deng Z. S., Liu J.	Proceedings of BIO2006, 2006 Summer Bioengineering Conference	2006,158036
245	Impedance tune-up of a high-frequency cascade thermoacoustic engine	Z.J.Hu, Q. Li, Qiang Li,Zhenyu Li	Proceedings of the 21st International Cryogenic Engineering Conference (ICEC21)	2006
246	Investigation of a miniature thermoacoustic refrigerator	Peng Hu, Qing Li, Zhengyu Li, Qiang Li	Proceedings of the 21st International Cryogenic Engineering Conference (ICEC21)	2006
247	Investigation on a pulse-tube type Stirling refrigerator driven by an oil-lubricated compressor	Wu Z., Luo E., Dai W., Li S.	Proceedings of the 21st International Cryogenic Engineering Conference (ICEC21)	2006
248	Simulation of thermoacoustic Stirling heat engines with multi-dimensional computational fluid dynamics	Yu G., Dai W., Luo E., Hu J., Wu Z.	Proceedings of the 21st International Cryogenic Engineering Conference (ICEC21)	2006
249	A design of the cryogenic system for the SRF cavities of SSRF	Xiong L., Liu L., Xu J., et al.	Proceedings of the 21st International Cryogenic Engineering Conference (ICEC21)	2006
250	Numerical analysis of the recooling of a LHC sector from 30 K to 1.9 K following resistive transition of a magnet string	Liu L., Riddone G., Tavian L.	Proceedings of the 21st International Cryogenic Engineering Conference (ICEC21)	2006
251	Acoustic impedance adjusting for a small cascade thermoacoustic engine	Hu Z. J., Li Q., Xie X. J., Zhou G., Li Q., Duthil P., Francois M. X.	Proc. Annual Meeting of France Acoustic Society	2006, 837-840
252	Bioheat Transfer Model, in Wiley Encyclopedia of Biomedical Engineering (invited chapter)	Liu J., M. Akay, Ed.	John Wiley & Sons, Inc.	2006，429-438
253	Extends the refrigeration limit of a thermoelectric element through micro/nano scale cooling	Li T., Liu J.	微纳电子技术	2006, 43(7), 342-350
254	Using electrical resistance to characterize the flow parameters of the solution in micro/nano fluidics channel	Qu X. P., Liu J.	微纳电子技术	2006, 43(1), 20-27, 36
255	Control of signal transmission across the liquid circuits of biological network through freeze switch	Bai X. D., Liu J.	微纳电子技术	2006, 43(5), 219-227
256	芯片强化散热研究新领域——低熔点液体金属散热技术的提出与发展	刘静，周一欣	电子机械工程	2006, 26(25)，9-12
257	论构建大幅降低医患成本的全新医疗装备模式—微全医院系统	饶伟，刘静	科技导报	2006,24, 42-49
258	微/纳米冰镊操作器执行过程的数值模拟	杨阳，刘静	传感技术学报	2006,19(5) 1673－1676
259	微/纳米流体控制用冰阀器件执行过程的数值模拟	杨阳，刘静	传感技术学报	2006, 19(5), 2022－2024
260	冻融型光网络开关	曲小鹏，刘静	激光与红外	2006,36(6),469-474
261	冷热神经毁损治疗疼痛的研究进展	闫井夫，刘静	中国疼痛医学杂志	2006,12, 244-246
262	脑肿瘤的冷热治疗及其热学问题分析	闫井夫，刘静	北京生物医学工程	2006,25, 325-329
263	循环温差法测定生物组织活性的实验研究	于丽娜，刘静，周一欣	北京生物医学工程	2006,25(2),151-155
264	胸腺温度场预测及提高胸腺温度增强人体免疫力的可行性研究	吕永钢，刘静	北京生物医学工程	2006,25(1), 24-30
265	生物组织电穿孔中的热效应研究	邓中山，刘静	工程热物理学报	2006,27, 118-120
266	考虑冷热刀刀头温度响应对制定肿瘤治疗计划的影响	邓中山，刘静，周一欣	工程热物理学报	2006,27增刊(2),41-44,
267	交变流动回热器的热声功能和回热功能	罗二仓，戴巍，Ray Radebaugh	工程热物理学报	2006, 27(1), 1-3
268	40K温区的热驱动低温热声制冷机	胡剑英，戴巍，罗二仓	工程热物理学报	2006, 27(2), 189-192
269	双行波热声制冷机耦合方式的研究	戴巍，罗二仓，余国瑶，胡剑英，张泳	工程热物理学报	2006, 27 (6), 917-919
270	润滑油溶解对低温混合工质组分浓度改变的实验研究	洪辉,公茂琼,张宇,周伟,吴剑峰	工程热物理学报	2006, 27（增刊1）, 76-78
271	用于批量快速筛选最佳低温保存程序的生物芯片技术	于丽娜，刘静，周一欣，华泽钊	低温工程	2006,1, 21-26
272	行波型热声发动机谐振管的调相作用	谢秀娟，李青，李正宇，李强	低温工程	2006, 1, 35-39
273	微型回热器等效直径与振荡频率的理论研究	刘益才，李青，杨智辉，刘振利，曹立宏，黄谦	低温工程	2006, 3, 55-59
274	基于管内平面波分解的热声谐振管声功测量方法	牛力，李正宇，李青	低温工程	2006, 6, 1-5
275	微型整体式斯特林制冷机系统的计算机仿真优化研究	刘赛，李青，李正宇，李强	低温工程	2006, 3, 43-47
276	正交试验法在高频级联型热声发动机研究中的应用	胡忠军，李青，李正宇，李强	低温工程	2006, 4, 14-19
277	低温节流阀的设计与计算	彭楠、熊联友、陆文海、刘立强、汤建成、张亮	低温工程	2006，5，32-34
278	低温真空泵辐射挡板流导几率的计算	彭楠、熊联友、刘立强、张亮	低温工程	2006，6，21-24
279	回热器参数对热声发动机性能影响的理论及实验研究	余国瑶,戴巍,罗二仓,吴张华,凌虹	低温工程	2006, 2, 15-20
280	热声斯特林发动机热动力学特性的CFD研究——第一部分:热声自激振荡演化过程	余国瑶,罗二仓,戴巍,胡剑英,吴张华	低温工程	2006, 4, 5-9
281	热声斯特林发动机热动力学特性的CFD研究第二部分:热声转换特性及热声声流的研究	余国瑶,罗二仓,戴巍,胡剑英,吴张华	低温工程	2006, 5, 11-16
282	超导线材短样测试装置测量系统	范宇峰,许庆金,龚领会,张亮,李来风	低温工程	2006, 3, 21-25
283	室温磁制冷机的实验性能研究	姚冠辉,公茂琼,吴剑峰	低温工程	2006, 3, 12-15
284	二元相互作用系数推算方法的发展	周伟,公茂琼,洪辉,吴剑峰	低温工程	2006, 1, 1-5
285	整体式斯特林制冷机基于网络模型的无量纲性能分析	刘赛，李青，李正宇，李强	低温技术	2006, 34(3)，161-164
286	行波热声发动机容腔管和反馈管的调相作用研究	周刚，李青，刘赛，李正宇，李强，牛力	低温技术	2006, 34(4)，250-254
287	焦炉气低温氢分离流程制冷循环	昌锟，李青，李强	低温技术	2006, 35(5)，387-391
288	二元混合工质HFC23/CFC13池核沸腾传热的实验研究	张立强,公茂琼,吴剑峰,徐烈	低温与超导	2006, 34(2), 97-99
289	自激振荡热声发动机的整机数值模拟研究	凌虹，罗二仓，戴巍，胡剑英	声学学报	2006, 31(4), 377-384
290	用于复叠式制冷循环低温级的新系列共沸/近共沸工质	吴剑峰,张宇	化工学报	2006, Vol.57（增刊）, 27-30
291	多元混合工质池核沸腾传热实验研究	孙兆虎,公茂琼,李志坚,吴剑峰	制冷学报	2006, 1, 9-14
292	无油压缩机驱动的混合工质节流制冷机工质浓度变化特征的实验研究	邓昭彬,公茂琼,吴剑峰	制冷学报	2006, 27(6), 5-9
293	突破液氢温度的热驱动热声制冷机	胡剑英,罗二仓,戴巍,周远	科学通报	2006, 51, 823-2824
294	用于汽液相平衡实验的电磁循环泵的设计与测试	张宇,公茂琼,朱洪波,洪辉,吴剑峰	流体机械	2006, 34(3), 1-3
295	环形流动的热声学特性分析	余国瑶,戴巍,罗二仓,陈燕燕,吴张华	低温超导	2006, 34(3), 152-156
296	Bi100-xSbx合金低温热电性能研究	刘华军,李来风,曲文生,师昌绪	稀有金属材料工程	2006, 35, 1838-1840
297	压力及高压增氧对La2-xSmxCuO4结构及输运性质的影响	吴云龙,宋春梅,熊玉峰,李来风	高压物理学报	2006, 20(4), 415-420
298	力学性能对Bi-2223/Ag超导带材临界电流影响实验研究	宋春梅,吴云龙,刘华军,教晓东,王正道,熊玉峰,李来风	低温物理学报	2006, 28(1), 82-86
299	一种新型压差控制自适应节流膨胀阀	公茂琼,吴剑峰,胡勤国,齐延峰	天然气工业	2006, 26 (2), 120-122
300	《微米/纳米尺度传热学》	刘静	北京：科学出版社	2006，2001-2003
301	芯片冷却技术的最新研究进展及其评价,《学科发展蓝皮书2005卷》	李腾，刘静	北京：中国科学技术出版社	2006，675-687
302	Heat-driven liquid metal cooling device for the thermal management of a computer chip	Ma K. Q., and Liu J.	J. Phys. D: Appl. Phys.	2007，40，4722-4729
303	Suitability of a thermoelectric power generator for implantable medical electronic devices	Yang Y., Wei X.-J., Liu J.	J. Phys. D: Appl. Phys.	2007，40，5790-5800
304	Nano liquid-metal fluid as ultimate coolant	Ma K.Q., Liu J.	Physics Letters A	2007，361，252-256
305	Formation of micro/nano structures out of soap bubbles	Bai X. D., Liu J.	Physica E	2007，39，85-88
306	New modality for maximizing cryosurgical killing scope while minimizing mechanical insertion trauma using combined freezing-heating system	Yan J. F., Deng Z. S., Liu J., Zhou Y. X.	ASME Journal of Medical Device	2007，1，264-271
307	Monitoring temperature of a heating needle and surrounding blood during interventional whole body hyperthermia therapy	Xiang S. H., Liu J., Zhou Y. X., Yan X. M.	Measurement Science and Technology	2007，18，3417-3424
308	Minimally invasive thermotherapy method for tumor treatment based on an exothermic chemical reaction	Deng Z.-S. and Liu J.	Minimally Invasive Therapy and Allied Technologies	2007，16，341-346
309	Feasibility study on using infrared thermometer for evaluation and administration of a cryosurgery	Yan J.-F., Wang H.-W., Liu J., Deng Z.-S., Rao W. and Xiang S.-H.	Minimally Invasive Therapy and Allied Technologies	2007，16，173-180
310	Measurement of local tissue perfusion through a minimally invasive heating bead	Lv Y. G., and Liu J.	Warme-und Stoffubertragung--Heat and Mass Transfer	2007，44，201-211
311	Entropy generation theory for characterizing the freezing and thawing injury of biological materials	Yu L. N., Liu J.	Forschung im Ingenieurwesen	2007，71，125-134
312	Effect of transient temperature on thermoreceptor response and thermal sensation	Lv Y. G., Liu J.	Building and Environment	2007，42，656-664
313	Cooling strategies and transport theories for brain hypothermia resuscitation	Liu J.	Frontiers of Energy and Power Engineering in China	2007，1，32-57
314	Biological chip technology to quickly batch select optimum cryopreservation procedure (invited paper)	Yu L. N., Liu J., Zhou Y. X. and Hua Z. Z.	Frontiers of Energy and Power Engineering in China	2007，1，316-321
315	Liquid metal cooling in thermal management of computer chip	Ma K. Q., and Liu J.	Frontiers of Energy and Power Engineering in China	2007，1，384-402
316	Evaluation of deep tissue destruction through temperature mapping of skin surface with application to cryosurgery	Deng Z. S., Liu J., Yan J. F.	Cryobiology	2007，55，361-362
317	Conformal cryosurgery assisted by laser heating: feasibility study	Deng Z. S., Liu J.	Cryobiology	2007，55(3)，373
318	The pattern of the ice ball formed during freezing of a phantom gel embedded with simulated blood vessels	Yan J. F., Zhou Y. X., Liu J., Deng Z. S.	Cryobiology	2007，55(3)，373
319	Polyimide-Surface-Modified Silica Tubes: Preparation and Cryogenic Properties	Y.H.Zhang, Y.Q. Li, G.T. Li, H.T.Huang, H. L. W. Chan, W.A. Daoud, J. H. Xin, and L.F.Li	Chem. of Materials	2007, 19(8), 1939-1945
320	Effect of the clusters of disordered atoms on thermal conductivity of Bi0.85Sb0.15 alloys.	H.J. Liu, L.F. Li	J. Alloys and Compounds	2007，433, 279-281
321	Thermoelectric performance of ternary Bi-Sb-Ag alloys prepared by mechanical alloying and subsequent pressureless sintering.	Huang Rong-jin, Song Chun-mei, Cai Fang-shuo, Li Lai-feng	J. of Physics and Chemistry of Solids,	2007，68，1400-1404
322	Numerical study on Quench Process and Protection of BES III Superconducting Detector Magnet	Q.J. Xu, S.K. Huang, Z.A. Zhu, L. Zhao, Z.G. Zong, L.Q. Liu, C.L. Yi, L. Zhang	Cryogenics	2007,47(5), 292-299
323	Heat transfer characteristics of oscillating flow regenerator filled with circular tubes or parallel plates	Chen YY, Luo EC, Dai W, Wu ZH	Cryogenics	2007, 47 (1), 40-48
324	An energy-focused thermoacoustic-Stirling heat engine reaching a high pressure ratio above 1.40	Yu GY, Luo EC, Dai W, Wu ZH	Cryogenics	2007, 47 (2), 32-134
325	Investigation of an innovative method for DC flow suppression of double inlet pulse tube coolers	Hu JY, Luo EC, Wu ZH, Zhu SL	Cryogenics	2007, 47 (5-6), 287-291
326	Processing method dependency of thermoelectric properties of Bi85Sb15 alloys in low temperature,	H.J. Liu, Ch.M.Song, S.T. Wu, L.F. LI	Cryogenics	2007，47，56-60
327	The cryogenic system of the 10.5 kV/1.5 kA high Tc superconducting fault current limiter	Gong L. H., Fang Z. C., Xu X. D., Jiao X. D., Li L. F., Xiao L.Y.	Cryogenics	2007, 47, 450-454
328	The three-phase 75m long HTS power cable	Dai S. T., Lin L. Z., Lin Y. B., et. al.	Cryogenics	2007, 47, 402-405
329	Preliminary commissioning of superconducting magnets and cryogenic system of BEPCII	Z. Zong, L. Liu, Q. Xu, et al.	International Journal of Modern Physics B	2007，21(18)，3163-3165
330	Cool-down of the First Sector of the Large Hadron Collider: Comparison between Mathematical Model and Measurement	L. Liu, G. Riddone, L. Serio and L. Tavian	Advances in Cryogenic Engineering	2007，53，1395-1402
331	Preliminary commissioning of cryogenic system of BESIII	Z. Zong, L. Liu, L. Zhang, et al	Advances in Cryogenic Engineering	2007，53，461-466
332	Numerical simulation of the cryogenic system of BEPCII	Z. Zong, L. Liu, L. Zhang, et al	Advances in Cryogenic Engineering	2007，53，467-474
333	Study on several important nonlinear processes of a large thermoacoustic-Stirling heat engine using computational fluid dynamics	Yu GY, Luo EC, Dai W, Hu JY	Journal of Applied Physics	2007, 102(7), 074901
334	A heat-driven thermoacoustic cryocooler capable of reaching below liquid hydrogen temperature	Hu JY, Luo EC, Dai W, Zhou Y	Chinese Science Bulletin	2007, 52 (4), 574-576
335	Investigation on a Stirling refrigerator with thermal buffer tube driven by an oil-lubricated compressor	Wu ZH, Li SF, Dai W, Luo EC	International Journal of Refrigeration	2007; 30, 1460-1465
336	Thermodynamic Comparison on Two Type of Stirling Refrigerator	Z.H. Wu, E.C. Luo, W. Dai, S.F. Li	Cryocooler	2007, 14, 249-256
337	A high frequency thermoacoustically driven thermoacoustic-Stirling cryocooler	E.C. Luo, G.Y. Yu, S.L Zhu, W. Dai	Cryocooler	2007, 14, 211-218
338	Modified oil-lubricated compressors for regenerative cryocoolers by using a simple elastic membrane	E.C.Luo, Z.H Wu, G.Y. Yu, J.Y. Hu, W. Dai	Cryocooler	2006,14, 361-366
339	Numerical Investigation of Gedeon DC FlowLoss in Thermoacoustic Cooler Systems	W.Dai and E.Luo	Cryocooler	2007, 14 205-210
340	Non-zero time-averaged thermoacoustic effects, linear or nonlinear?	E.C. Luo	Cryocooler	2006,14, 195-204
341	A thermoacoustically driven two-stage pulse tube cryocooler	J.Y. Hu, E.C. Luo, W.Dai ,Z.H. Wu and G.Y. Yu	Cryocooler	2006, 14,219-224
342	Vapor-liquid equilibrium data of the methane + tetrafluoromethane system at temperatures from (159.61 to 178.93) K	Zhu H. B., Gong M. Q., Zhang Y., Wu J. F.	Journal of Chemical and Engineering Data	2007, 52(2), 463
343	Nucleate pool boiling heat transfer measurement of HC170/HFC23 system	Zhang L. Q., Gong M. Q., Zhang Y., Li P., Wu J. F., Xu L.	International Communications on Heat and Mass transfer	2007, 34(3), 277
344	Nucleate pool boiling heat transfer of binary mixtures with different boiling ranges	Zhang L. Q., Gong M. Q., Wu J. F., Xu L.	Experimental Heat Transfer	2007, 20(3), 251
345	Nucleate pool boiling heat transfer measurements of HFC23/CFC13 system	Zhang L. Q., Gong M. Q., Wu J. F., Xu L.	Journal of Thermal Science	2007, 16(3), 370
346	Nucleate pool boiling heat transfer coefficients of pure HFC134a, HC290, HC600a, and their binary and ternary mixtures	Sun Z. H., Gong M. Q., Li Z. J., Wu J. F.	International Journal of Heat and Mass Transfer	2007, 50(1-2),54
347	Field test and demonstrated operation of 10.5kV/1.5kA HTS fault current limiter	Li L. F., Gong L. H., Xu X. D., Lu J. Z., Fang Z., Zhang H.X.	IEEE Transactions on Superconductivity	2007, 17, 2055-2058
348	Numerical investigation of Gedeon DC flow loss in thermoacoustic cooler systems	Dai W., Luo E. C.	Cryocoolers	2007, 14, 205
349	Composition shift of a mixed-gas Joule-Thomson refrigerator driven by an oil-free compressor	Gong M. Q., Deng Z. B., Wu J. F.	Cryocoolers	2007, 14, 453
350	Composition shift due to the different solubility in the lubricant oil for multi-component mixtures	Gong M. Q., Zhou W., Wu J. F.	Cryocoolers	2007, 14, 459
351	A high frequency thermoacoustically driven thermoacoustic-Stirling cryocoolers	Luo E. C., Yu G. Y., Zhu S. L., Dai W.	Cryocoolers	2007, 14, 211
352	A thermoacoustically driven two-stage pulse tube cryocoolers	Hu J. Y., Luo E. C., Dai W., Wu Z. H., Yu G. Y.	Cryocoolers	2007, 14,219
353	A thermoacoustically-driven single-stage pulse tube cryocooler operating below 35K	Hu J. Y., Luo E. C., Wu Z. H., Dai W.	Proceedings of 21 International Cryogenic Engineering Conference	2007
354	A 300Hz thermoacoustically-driven pulse tube cooler for temperature below 100K	Dai W, Yu GY, Zhu SL, Luo EC	Applied Physics Letters	2007, 90 (2), 024104
355	Nano-cryosurgery: a basic way to enhance freezing treatment of tumor	Liu J., Yan J. F., Deng Z. S.	2007 ASME International Mechanical Engineering Congress & Exposition	2007,IMECE2007-43916
356	Coformal tumor treatment by the combined cryosurgical and hyperthermia: optimal configuration of the multiple probes	Deng Z. S., and Liu J.	2007 ASME International Mechanical Engineering Congress & Exposition	2007,IMECE2007-43920
357	Computerized planning of multi-probe cryosurgical treatment for tumor with complex geometry	Deng Z. S., and Liu J.	2007 ASME International Mechanical Engineering Congress & Exposition	2007
358	An 18K heat-driven thermoacoustic cryocoolers	Hu J. Y., Luo E. C., Dai W.	Proceedings of The 22nd IIR International Congress of Refrigeration (ICR 2007)	2007
359	Comparison between experimental and numerical results on a 300Hz thermoacoustically-driven pulse tube cooler	Zhu S. L., Dai W., Yu G. Y., Luo E. C.	Proceedings of The 22nd IIR International Congress of Refrigeration (ICR 2007)	2007
360	Vapor-compression- refrigerator enabled thermal management of high performance computer	Rao W., Zhou Y. X., Liu J., Deng Z.S., Ma K.Q., Xiang S.H..	Proceedings of The 22nd IIR International Congress of Refrigeration (ICR 2007)	2007
361	Animation of cryosurgical process of biological tissues during tumor treatment	Rao W., Sun Z. Q., Liu J.	Proceedings of The 22nd IIR International Congress of Refrigeration (ICR 2007)	2007
362	Laser assisted cryosurgical resection of malignant tumor tissues	Rao W., Liu J., Zhou Y. X.	Proceedings of The 22nd IIR International Congress of Refrigeration (ICR 2007)	2007
363	A combined cryosurgical/hyperthermia system using the Peltier thermoelectric effect	Deng Z. S., Zhou Y. X., Liu J.	Proceedings of The 22nd IIR International Congress of Refrigeration (ICR 2007)	2007
364	Improved freezing injury on in vitro brain tumor cells by use of nanoparticle adjuvants	Deng Z. S., Zhang H., Liu J., Yan J. F., Yang Y.	Proceedings of The 22nd IIR International Congress of Refrigeration (ICR 2007)	2007
365	The Operating Principle and Experimental Study of a Novel Heat Exchange Loop Used for Oscillating Flow Refrigeration Systems	B. Gao, E.C.Luo, W.Dai	Proceedings of The 22nd IIR International Congress of Refrigeration (ICR 2007)	2007
366	An 18K heat-driven thermoacoustic cryocooler	J.Y.Hu, E.C.Luo, W.Dai	Proceedings of The 22nd IIR International Congress of Refrigeration (ICR 2007)	2007
367	Characteristics of a pulse tube cooler operating around 300 Hz	Zhu Shanglong, Dai Wei, Yu Guoyao, Luo Ercang	Proceedings of The 22nd IIR International Congress of Refrigeration (ICR 2007)	2007
368	Numerical investigation on a four-valve type of pulse tube refrigerator	S.F.Li, Z.H.Wu,E.C.Luo, W.Dai	Proceedings of The 22nd IIR International Congress of Refrigeration (ICR 2007)	2007
369	Thermodynamic of thermoacoustic tubes	W. Dai, E.C.Luo	Proceedings of The 22nd IIR International Congress of Refrigeration (ICR 2007)	2007
370	A reciprocating room temperature magnetic refrigerator using a permanent magnet	YaoG. H., Gong M. Q., Wu J. F.	Proceedings of The 22nd IIR International Congress of Refrigeration (ICR 2007)	2007
371	Thermodynamics in the pulse tube coolers	Dai W., Luo E. C.	Proceedings of The 22nd IIR International Congress of Refrigeration (ICR 2007)	2007
372	Bubble based micro/nano fabrication method	Bai X.-D. and Liu J.	International Conference on Integration and Commercialization of Micro and Nano-systems	2007
373	Numerical evaluation on the cooling capability of MEMS based liquid metal cooling device used in harsh environment	Deng Z.-S., Liu J., Zhou Y.-X.	International Conference on Integration and Commercialization of Micro and Nano-systems	2007
374	Theoretical evaluation on the thermal effects of extracellular hyperthermia and intracellular hyperthermia	Deng Z.-S., Liu J.	International Conference on Integration and Commercialization of Micro and Nano-systems	2007
375	Conformal RF ablation to reduce "dead region" with adjuvant injection of magnetic micro/nano particles: feasibility study	Deng Z.-S., Liu J., Zhang J. R.	International Conference on Integration and Commercialization of Micro and Nano-systems	2007
376	Investigation on a miniature thermoacoustic engine	Zhou G, Li Q，Li Zheng-yu	International Congress on Ultrasonics	2007
377	Control system　model analysis on the onset of self-excited oscillation in a cascade　thermoacoustic engine	Zhong Jun Hu, Li Q, Qiang Li	International Congress on Ultrasonics	2007
378	Experimental identifying method of the thermoacoustic characteristics of　regenerator in high frequency thermoacoustic systems	Fuzhen Zhang, Li Q，Li Zheng-yu	International Congress on Ultrasonics	2007
379	Optimized design and experiment on a　miniature thermoacoustic refrigerator	Peng Hu Li Q, Li-Ping Zhang	International Congress on Ultrasonics	2007
380	A thermoacoustically-driven microminiature pulse tube cooler operating with high frequency around 300Hz	E.C.Luo, G.Y.Yu, W.Dai, S.L.Zhu, Z.H.Wu	Proceedings of the 13th International Stirling Engine Conference	2007, 221-225
381	A thermoacoustically driven two-stage pulse tube cryocooler operating below 20K	E.C.Luo, J.Y.Hu, Z.H.Wu, W.Dai, Y.Zhou	Proceedings of the 13th International Stirling Engine Conference	2007, 230-233
382	Study on a thermoacoustic-Stirling electrical generator	Ercang Luo, Zhanghua Wu, Wei Dai, Li Shanfeng	Proceedings of ISES Solar World Congress	2007, 1833-01837
383	Theoretical Analysis of Heat Transfer Characteristics of Cyclic Regenerator with Circular Tubes or Parallel Plates	Yuanyuan Chen, Ercang Luo, Wei Dai,	Proceedings of the 21st International Cryogenic Engineering Conference (ICEC21)	2007, 615-618
384	A thermoacoustically-driven single-stage pulse tube cryocooler operating below 35K	Hu Jianying, Luo Ercang, Dai Wei	Proceedings of the 21st International Cryogenic Engineering Conference (ICEC21)	2007, 493-496
385	Characteristics of a Standing Wave Thermoacoustic Engine with Spring-mass Resonator	Dai W., Luo E	Proceedings of the 21st International Cryogenic Engineering Conference (ICEC21)	2007, 567-570
386	Long thin tubes in thermoacoustic systems	Dai W., Luo E. C., Hu J., Yu G.	Proceedings of 21 International Cryogenic Engineering Conference	2007
387	Visual experiment on nanoparticles enhanced freezing for cryosurgery,	Yan J. F., Zhou Y. X., Liu J. and Deng Z. S.	1st Annual IEEE Int. Conf on Nano/Molecular Medicine and Engineering	2007
388	Conformal cryosurgical treatment of tumor by use of nanoparticles: feasibility study	Deng Z. S., Liu J.	1st Annual IEEE Int. Conf on Nano/Molecular Medicine and Engineering	2007
389	Combined RF hyperthermia and hot nanofluid injection for tumor treatment	Deng Z. S., Liu J.	1st Annual IEEE Int. Conf on Nano/Molecular Medicine and Engineering	2007
390	A thermoacoustically-driven pulse tube cooler working around 300Hz	Dai W., Zhu S. L., Yu G. Y., Luo E. C.	International Congress on Ultrasonics	2007
391	Investigation on thermoacoustic-Stirling electric generator	Wu Z. H., Li S. F., Luo E. C., Dai W.	International Congress on Ultrasonics	2007
392	New model and measurement principle of flow and heat transfer characteristics of regenerator	Chen Y. Y., Luo E. C., Dai W	Cryogenic Engineering Conference and the International Cryogenic Materials Conference (CEC-ICMC)	2007
393	Investigation on high frequency thermoacoustic-Stirling heat engine	Yu G. Y., Luo E. C., Dai W., Wu Z. H.	International Congress on Ultrasonics	2007
394	Experimental validation of a conceptual vapor-based air-conditioning system for the reduction of chip temperature through environmental cooling in a computer closet	Lv Y. G., Zhou Y. X., and Liu J.	应用基础与工程科学学报	2007，15，531-546
395	小鼠乳腺癌发生过程的红外热图特征及其早期诊断学意义	张辉，杨阳，刘静	科技导报	2007，25，36-42
396	温度，时间及葡萄糖加载对深低温（-15?C附近）冻存蚂蚁复活的影响	张素清，周一欣，闫井夫，杨阳，刘静	科技导报	2007，25，34-37
397	纳米冷冻治疗学—纳米医学的新前沿	刘静	科技导报	2007，25，67-74
398	温度、时间及葡萄糖加载对深低温（-15°C附近）冻存蚂蚁复活的影响	张素清，周一欣，闫井夫，杨阳，刘静	科技导报	2007, 25, 34-37
399	基于微型风扇阵列系统的人体降温空调服	曾彦彰，邓中山，刘静	纺织学报	2007，28，100-105
400	基于血管介入式加热的微创性全身热疗方法	项士海，刘静，周一欣	北京生物医学工程	2007，26，63-69
401	纳米流体研究的新动向	马坤全，刘静	物理	2007，36，295-300
402	自制冷热刀医疗设备靶向治疗肿瘤的性能实验	闫井夫，周一欣，邓中山，项士海，刘静	中国组织工程研究与临床康复	2007，11，4325-4328
403	高功率激光-血管-组织相互作用的红外试验研究	饶伟，刘静，周一欣，邓中山，闫井夫，张素清	中国组织工程研究与临床康复	2007，11，5109-5112
404	红外热图监测微波辐照式全身热疗中体表温度的变化	吕永钢，刘静，闫井夫	中国组织工程研究与临床康复	2007，11，7019-7023
405	热声发动机径向尺寸对谐振频率的影响	周刚，李青，李正宇，李强	声学技术	2007, 26(4), 761-766
406	表面裂纹法研究2A14T6铝合金焊接接头低温断裂韧性	潘勤彦,黄诚,熊焕,付绍云,郑斌,赵立中,	低温工程	2007, 4, 29-34
407	定量刻画冷冻手术中生物组织损伤度的熵产理论	闫井夫,刘静	低温工程	2007，2，50-55
408	气液两相低温流体空泡率测量技术及其进展	徐冬龚领会	低温工程	2007, 6 32-37
409	低温液体储箱加压排液过程计算模型比较	张勇，李正宇，李强，胡忠军，李青	低温工程	2007, 2, 24-28
410	管内流体交变流动速度的横向分布研究	康慧芳，李青，周刚，张勇，李正宇	低温工程	2007, 3, 11-15
411	微型热声制冷机的试验研究	胡鹏，李青，李正宇，李强	低温工程	2007, 3, 25-28
412	焦炉气规模氢分离流程组织研究	昌锟，李青，李强	低温工程	2007, 5, 36-42
413	应用于大型,粒子加速器的低温技术	张亮，宗占国，刘立强等	低温工程	2007,增刊，175-3182
414	液氮冷却钛蓝宝石激光晶体的应用研究	熊联友，彭楠，汤建成，陆文海，刘立强	低温工程	2007,增刊，251-254
415	超导高频腔低温恒温器的研制进展	赵同宪，刘立强，熊联友等	低温工程	2007,增刊，255-261
416	3T超导螺线管标准磁铁的研制	彭楠，熊联友，刘立强等	低温工程	2007,增刊，406-409
417	6k×6k CCD天文望远镜液氮恒温器的研制	汤建成，熊联友，陆文海等	低温工程	2007,增刊，311-315
418	全氟甲烷饱和蒸气压在（139.53～217.53）K温度范围内的实验研究	朱洪波,公茂琼,张宇,吴剑峰	低温工程	2007, 2, 1
419	深冷多元混合物工质节流制冷技术研究进展	吴剑峰,公茂琼	低温工程	2007,增刊, 183
420	300Hz脉冲管制冷机的特性研究	朱尚龙,余国瑶,戴巍,罗二仓	低温工程	2007, 1, 1
421	一种高频热驱动脉冲管制冷机不稳定现象的研究	朱尚龙,余国瑶,戴巍,罗二仓	低温工程	2007, 5, 28
422	一种压力波驱动的非共振型直流换热器的工作原理及实验	高波,罗二仓,吴张华	低温工程	2007, 4, 1
423	光纤布拉格光栅应变传感器的低温特性	倪正华,叶晓平,徐敏,黄荣进,李来风	低温工程	2007, 2, 11-14
424	肿瘤热疗中正常组织的降温保护方法	邓中山，刘静	工程热物理学报	2007，28，466-468
425	影响回热器换热的各参数讨论	陈燕燕，罗二仓，戴巍	工程热物理学报	2007, 28(4), 688-690
426	油润滑压缩机驱动脉管型双活塞斯特林制冷机的实验研究	吴张华,罗二仓,戴巍，李山峰	工程热物理学报	2007, 28(2), 208-210
427	一种基于弹性膜片的脉冲管制冷机.	胡剑英,罗二仓,戴巍,吴张华	工程热物理学报	2007, 28 (增刊), 57-60
428	低温汽液相平衡实验系统的研制与验证	张宇,公茂琼,朱洪波,刘加永,吴剑峰	工程热物理学报	2007,28(1), 27-29
429	R170+R23系的汽液液相平衡研究	张宇,公茂琼,刘加永,朱洪波,吴剑峰	工程热物理学报	2007, 28(5), 745
430	油润滑压缩机驱动的脉管型双活塞斯特林制冷机的实验研究	吴张华,罗二仓,戴巍,李山峰	工程热物理学报	2007,28(2), 208
431	关于SLX系列程序控制深冷箱温度均匀性的研究	郭嘉	热处理技术与装备	2007, 28(4), 39-42
432	无动力氨回收技术的新进展及应用	任小坤,张武	化肥设计	2007, 45(2),49-51
433	无动力氨回收技术的新进展及新应用	任小坤,张武	第24届全国氮肥厂技改经验交流年会论文集	2007, 516-518
434	复叠系统低温级制冷剂的循环性能对比实验	孟冲,公茂琼,张宇,吴剑峰	低温与超导	2007, 35(3), 188
435	系列单压缩机混合工质深冷冰箱	公茂琼,吴剑峰,胡勤国,郭平,周远,罗二仓,李佐,胡效宗	制冷学报	2007, 28(4), 20
436	300 Hz高频热声驱动脉冲管制冷机	朱尚龙,余国瑶,张晓东,戴巍,罗二仓,周远	科学通报	2007, 52(22), 2696
437	小型斯特林热声发动机谐振管内径的影响研究	周刚,李青,李正宇	科学通报	2007, 52(11), 1329
438	热声技术研究进展	罗二仓	中国基础科学	2007, 9(4), 14
439	多壁碳纳米管表面等离子体有机聚合改性	王宏,李来风,张浩,时东陆	复合材料学报	2007, 24(3), 121-125
440	等离子体有机聚合覆膜反应装置与应用	王宏,李来风, 黄传军, 时东陆	核聚变与等离子体物理	2007, 27(2), 150-155
441	高氮奥氏体不锈钢与316L不锈钢的冷变形行为研究	王松涛,杨柯,单以银,李来风	金属学报	2007, 43(2), 171-176
442	冷变形对高氮奥氏体不锈钢组织与力学行为的影响	王松涛,杨柯,单以银,李来风	金属学报	2007, 43(7), 713
443	高压合成纳米晶Bi0.85Sb0.15的低温热电性能	宋春梅,刘华军,黄荣进,蔡方硕,李来风	材料研究学报	2007, 21(2),126-130
444	Pb对Bi-Sb基纳米热电材料低温性能影响	宋春梅,高钦翔,黄荣进,许雯,龚领会,李来风	功能材料	2007, 38, 1335-1337
445	聚氨酯改性环氧树脂体系的力学性能研究	潘勤彦,杨果,付绍云	绝缘材料	2007, 40(2), 28-30
446	《低温生物医学工程学原理》	刘静	北京：科学出版社	2007
447	冷冻、热疗双效肿瘤治疗仪，《肿瘤微创治疗技术》	刘静，王洪武、杨仁杰主编	北京：北京科学技术出版社	2007，256-277
448	热动力学	郭方中，李青	华中科技大学出版社,国内出版-中文专著	2007
449	JJF1170-2007负温度系数低温校准规范	林鹏，张庆庚，喻力弘	中国计量出版社	2007
450	Nano-cryosurgery and its mechanisms on enhancing freezing treatment of tumor	Yan J. F., Liu J.	Nanomedicine Nanotechnology, Biology, and Medicine	2008, 4, 79-87
451	Tumor thermal ablation therapy using alkali metals as powerful self heating seeds	Rao W., Liu J.	Minimally Invasive Therapy and Allied Technologies	2008, 17, 43-49
452	Numerical simulation on Taylor dispersion enabled micro-mixture	Yang Y., Liu J.	Forsch Ingenieurwes	2008, 72,
453	Characterization of the nano-cryosurgical freezing process through modifying Mazur's model	Yan J. F., Liu J.	Journal of Applied Physics	2008,103, 084311
454	Geometric optimization of an active magnetic regenerative refrigerator via second-law analysis	Li P., Gong M.Q., Wu J.F	Journal of Applied Physics	(2008), 104, 103536
455	Heat-driven thermoacoustic cryocooler operating at liquid hydrogen temperature with a new coupler	Hu JY, Luo EC, Li SF, Yu B, Dai W,	Journal of Applied Physics	2008, 103, 104906
456	Power sources and electrical recharging strategies for implantable medical devices	Wei X. J., Liu J.	Frontiers of Energy and Power Engineering in China	2008, 2, 1-13
457	Comprehensive evaluation on the heating capacities of four typical whole body hyperthermia strategies via compartmental model	Xiang S. H., Liu J.	International Journal of Heat and Mass Transfer	2008, 51, 5486–5496
458	Anti-tumor effect of sodium-induced thermochemical ablation therapy	Rao W., Liu J., Zhou Y. X., Yang Y., Zhang H.	International Journal of Hyperthermia	2008, 24(8), 675-681
459	A convective cooling enabled freeze tweezer for manipulating micro scale objects	Yang Y., Liu J., and Zhou Y. X.	J. Micromech. Microeng	2008, 18, 095008
460	Entropy generation at the cellular level during freezing process of biological materials	Yan J. F., and Liu J.	Journal of Non-Equilibrium Thermodynamics	2008,33(4), 307–320
461	Nano thermo-hydrodynamics method for investigating cell membrane fluidity	Yang Y., Liu J.	Frontiers of Energy and Power Engineering in China	2008, 2, 121-128
462	Study of thawing behavior of liquid metal used as computer chip coolant	Ma K. Q., Liu J., Xiang S. H., Xie K. W., Zhou Y. X.	International Journal of Thermal Sciences	2008, 48(5), 964-974
463	Disclosure of the significant thermal effects of large blood vessels during cryosurgery through infrared temperature mapping	Deng Z. S., Liu J., Wang H. W.	International Journal of Thermal Sciences	2008, 47, 530-545
464	Low-temperature negative thermal expansion of the anti-perovskite manganese nitride Mn₃CuN co-doped with Ge and Si	Rongjin Huang, Laifeng Li, Fangshuo Cai, Xiangdong Xu, Lihe Qian	Applied Physics Letters.	2008, 93(7), , 081902
465	Properties of Some Toughened Radiation Stable Epoxy Resins	H. Zhang, R.J. Huang, L.F. Li, D. Evans	Adv. in Cryo. Eng.	2008, 54, 174-181
466	Properties of Some Toughened, Radiation Stable Epoxy Resins.	H.Zhang, R.J. Huang, L.F. Li, D. Evans, R.P. Reed	Adv. in Cryogenic Eng. Mater., Transaction of ICMC	2008, 54, 174-181
467	Low temperature thermoelectric properties of Bi-Sb alloys with partial substitution of Ag or Zn for Sb	R.J.Huang, F.S.Cai, L.H.Gong, L.F.Li, D.Evans	Adv. in Cryogenic Eng. Mater., Transaction of ICMC	2008, 54, 27-33
468	Negative Thermal Expansion and Electrical Properties of Mn₃(Cu_0.6Nb_xGe_0.4-x)N Compounds	R.J. Huang, W. Xu, X.D. Xu, L.F. Li, X. Q. Pan, D. Evans	Mater. Lett.	2008, 62, 2381-2384
469	Thermoelectric Performance of Poly(3,4-ethylenedioxythiophene): Poly (styrenesulfonate)	F.X Jiang, JK, Xu, BY Lu, Y. Xie, RJ Huang, L.F. LI	Chin. Phys. Lett	2008,25, 2202-2205
470	A Miniature thermoacoustic Stirling engine	Gang Zhou, Qing Li, Zheng Yu Li, Qiang Li	Energy Conversion and Management	2008, 49(6), 1785
471	Orthogonal　experimental study on a high frequency cascade thermoacoustic engine	Zhong Jun Hu, Qing Li, Zheng Yu Li, Qiang Li	Energy Conversion and Management	2008, 49(6), 1211
472	Optimal exergy-efficiency of a thermoacoustic cooler with a complex heat-transfer exponent	Qing Li, Lingen Chen, Feng Wu, Fangzhong Guo d, Deliang Guo	Applied energy	2008, 85(7), 634
473	Influence of a resonator diameter on a miniature thermoacoustic Stirling heat engine	Zhou G, Li Q，Li Zheng-yu	Chinese Science Bulletin	2008, 53（1）, 145
474	A 300 Hz high frequency thermoacoustically driven pulse tube cooler	Zhu SL, Yu GY, Zhang XD, Dai W, Luo EC, Zhou Y	Chinese Science Bulletin	2008, 53 (8), 1270-1271
475	100 W-class traveling-wave thermoacoustic electric generator	Luo EC，Wu ZH, Dai W, Li SF, Zhou Y	Chinese Science Bulletin	2008; 53,1453-1456
476	Optimizing hydraulic radius and acoustic field of the thermoacoustic engine	Kang Huifang，Qing Li, Gang Zhou	Cryogenics	2008, 49, 112-119
477	Characterization of a 300Hz thermoacoustically-driven pulse tube cooler	Zhu SL,Dai W, Yu GY, Luo EC	Cryogenics	2008, 53 (9), 1453-1456
478	Refrigeration cycle for cryogenic separation of hydrogen from coke oven gas	Kun Chang. Qing Li，Qiang Li	Frontiers of Energy and Power Engineering	2008, 2(4), 484
479	Experimental study on SC RF cavities by using China large grain niobium for ILC	Zhong Zhan-Guo, Gao Jie, K. Saito, et al.	Chinese Physics C (HEP & NP)	2008，32(2)，1-5
480	Study on cooling process of cryogenic system for superconducting magnets of BEPC	Zong Zhan-Guo, Liu Li-Qiang, Xiong Lian-You	Chinese Physics C (HEP & NP)	2008，32(9)，761-765
481	New model and measurement principle of flowing and heat transfer characteristics of regenerator	Chen YY, Luo EC, Dai W	Advances in Cryogenic Engineering	2008, 53(A), 251-258
482	Universal scaling law of inertance tube phase shifter	Zhu SL, Luo EC, Wu ZH, Dai W	Advances in Cryogenic Engineering	2008, 53(B), 1075-1082
483	Experimental demonstration of a novel heat exchange loop used for oscillating flow systems	Gao B, Wu ZH, Luo EC, Dai W	Advances in Cryogenic Engineering	2008, 53(B), 1114-1121
484	Numerical simulation of a three-stage Stirling-type pulse tube cryocooler for 4k operation	Hu JY, Luo EC, Dai W, Wu ZH	Advances in Cryogenic Engineering	2008, 53 (B), 1531-1538
485	A thermoacoustically-driven pulse tube cryocooler operating around 300 Hz	Yu GY, Zhu SL, Dai W, Luo EC	Advances in Cryogenic Engineering	2008, 53(B), 1659-1666
486	Vapor-Liquid Equilibria of the Fluoroethane (R161) + 1,1,1,2-Tetrafluoroethane (R134a) System at Various Temperatures from (253.15 to 292.92) K	Dong X.Q., Gong M.Q., Zhang Y., Wu J.F.	Journal of Chemical and Engineering Data	2008, 53 (9), 2193-2196
487	Prediction of homogeneous azeotropes by Wilson equation for binary HFCs and HCs refrigerant mixtures	Dong X.Q., Gong M.Q., Zhang Y., Wu J.F.	Fluid Phase Equilibria	2008, 269:6-11
488	Plastic deformation and fracture behaviors of nitrogen-alloyed austenitic stainless steels	Wang S.T., Yang K., Shan Y.Y. Li L.F.	Materials Science and Engineering A	(2008), 490, 95-104
489	Development of interventional whole body hyperthermia system: Part I: Device fabrication and performance evaluation	Xiang S. H., Chen B. W., Zhou Y. X., Yan X. M., Liu J.	Forsch Ingenieurwes	2008, 72, 145–152,
490	Cryogenic thermal ecpansion properties of Mn₃(Cu_0.6Nb_0.2Ge_0.2)N/epoxy composites	Huang R.J.,Cai F.S,Zhang H.,Zheng L.Y.,Xu X.D.,Li L.F	Proceedings of 22nd International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2008(ICEC 22 & ICMC 2008)	2008, 1031
491	Low temperature magnetic properties of Nb doped manganese negative thermal expansion materials	Cai F.S., Huang R.J, Li L.F. ,Xu X.D	Proceedings of 22nd International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2008(ICEC 22 & ICMC 2008)	2008, 1037
492	Thermoelectric properties of n-type Ag-doped Bi-Sb alloys at cryogenic temperatures	Xu W., Huang R.J., Li L.F., Gong L.H., Zheng L.Y., Song C.M.	Proceedings of 22nd International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2008(ICEC 22 & ICMC 2008)	2008, 1049
493	Effect of In on the low temperature thermoelectric properties of Bi-Sb Alloy	Xu W., Huang R.J., Li L.F., Gong L.H., Zheng L.Y., Song C.M.	Proceedings of 22nd International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2008(ICEC 22 & ICMC 2008)	2008
494	Impedance modulation of linear generator on the coaxial traveling-wave thermoacoustic engine	Xie Xiujuan, Qing Li，Li Zhengyu	Proceedings of 22nd International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2008(ICEC 22 & ICMC 2008)	2008
495	Experimental investigation on the onset temperature gradient using the multifunction cascade thermoacoustic device	Hui-Fang Kang, Qing Li，Zhong-Jun Hu	Proceedings of 22nd International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2008(ICEC 22 & ICMC 2008)	2008
496	High Frequency Pulse Tube Driven By a Miniature Thermoacoustic Engine	Gang Zhou,Qing Li，Zhen-yu Li	Proceedings of 22nd International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2008(ICEC 22 & ICMC 2008)	2008
497	Large-scale hydrogen separation from coke-oven gas	Kun CHANG, Qing LI, Qiang LI	Proceedings of 22nd International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2008(ICEC 22 & ICMC 2008)	2008
498	Thermally Driven Thermoacoustic Refrigeration and Its Recent Progress	Luo E.C., DAI W., and HU J.Y.	Proceedings of International Conference on Cryogenics and Refrigeration (ICCR2008)	2008, 29-40
499	Nucleate pool boiling heat transfer characteristics of liquid methane and methane+ethane mixtures	Jia Ma, Maoqiong Gong, Jianfeng Wu	Proceedings of International Conference on Cryogenics and Refrigeration (ICCR2008)	2008, 172-176
500	Modification of flammability limits correlations for hydrofluorocarbon mixtures, in: Cryogenics and refrigeration	Z. M. Li, M. Q. Gong, J. F. Wu, Y. Zhou	Proceedings of International Conference on Cryogenics and Refrigeration (ICCR2008)	2008, 155-158
501	Modification of an azeotropy predicting model for HFCs and HCs refrigerant mixtures	Xueqiang Dong, Maoqiong Gong, Yu Zhang, Jianfeng Wu	Proceedings of International Conference on Cryogenics and Refrigeration (ICCR2008)	2008, 189-191
502	Cryogenic thermal expansion properties of Mn3(Cu0.6Nb0.2Ge0.2)N/epoxy composites	Huang R.J., Cai F.S., Zhang H., Zheng L.Y., Xu X.D., Li L.F.	Proceedings of 22nd International Cryogenic Engineering Conference　 and International Cryogenic Materials Conference 2008(ICEC 22 & ICMC 2008)	2008
503	Concentration effects of nanoparticles on enhancing nanocryosurgery	Sun Z. Q., Liu J., Zhou Y. X	2nd IEEE International Conference on Nano/Molecular Medicine and Engineering (IEEE-NANOMED2008)	2008
504	Infrared imaging to quantify microwave needle induced nano-hyperthermia	Sun Z. Q., Liu J.	2nd IEEE International Conference on Nano/Molecular Medicine and Engineering (IEEE-NANOMED2008)	2008
505	Low temperature scanning calorimetric study on nano-biological material	Zeng Y. Z., Liu J	2nd IEEE International Conference on Nano/Molecular Medicine and Engineering (IEEE-NANOMED2008)	2008
506	Sweating feature as a potential index for improving tumor diagnostics using thermal infrared image	Zhang H., Liu J., Deng Z. S., He Z. Z., and Xiao J.	The 5th International Workshop on Wearable and Implantable Body Sensor Networks (BSN 2008)	2008
507	Effect of fixing material on skin-contact temperature measurement by wearable sensor	Deng Z. S., Liu J.	The 5th International Workshop on Wearable and Implantable Body Sensor Networks (BSN 2008)	2008
508	The effects of large blood vessels on three-dimensional tissue temperature distributions during electromagnetic induced nano-hyperthermia: numerical simulation	Deng Z. S., Liu J	ASME 2nd Integration & Commercialization of Micro & Nanosystems International Conference & Exhibition	2008
509	Uncertainty analysis in bioheat transfer modeling for treatment planning of nano-cryosurgery	Deng Z. S., Liu J.	ASME 2nd Integration & Commercialization of Micro & Nanosystems International Conference & Exhibition	2008
510	Rapid electromagnetic rewarming of cryopreserved tissues using nano-magnetoparticles: feasibility study	Deng Z. S., Liu J.	ASME 2nd Integration & Commercialization of Micro & Nanosystems International Conference & Exhibition	2008
511	Thermoresistive Flow Sensors, in Encyclopedia of Micro- and Nanofluidics (invited chapter)	Liu J., D. Li, Ed.	Springer	2008，2065-2072
512	光电和热电薄膜联合产电中的热传导	吴祖林,刘静	太阳能学报	2008, 29，74-79
513	细胞尺度冰晶生长行为的相场数值模拟	李方方，刘静，乐恺	低温物理学报	2008. 30, 171-175
514	构建低成本家庭医疗装备系统的可行性研究	饶伟,邓月光,杨阳,刘静	科技导报	2008, 26，3,46-51
515	以PC机为载体的低成本健康检测DIY技术	张声威,刘静,	科技导报	2008, 26，5, 81-88
516	通向超低成本肿瘤治疗之路的高强度热化学靶向消融方法	刘静，邓中山，饶伟	科技导报	2008, 26，2, 78-84
517	消除城市热岛效应的大尺度热管理技术	邓月光，刘静，周远.	科技导报	2008, 26，8,84-92
518	负热膨胀材料研究进展	蔡方硕，黄荣进，李来风	科技导报	2008，26(12)84-88
519	注射麻醉剂抑制小鼠EMT6乳腺肿瘤的生长	张辉,杨阳,刘静,邓中山	科技导报	2008, 26，4，66-71
520	浅析可穿戴式治疗系统	陈柏炜,刘静	科技导报	2008, 26(11), 81-86
521	四类典型全身热疗方法加热效果的理论评估	项士海，刘静	北京生物医学工程	2008, 27，48-52
522	基于隔热薄层的高安全性冷热治疗探针	闫井夫，刘静，周一欣,邓中山	北京生物医学工程	2008, 27, 61-66
523	利用飞秒激光研究微液滴的冻结相变特性	李方方，方香云，刘静，邓中山，周一欣，乐恺	激光生物学报	2008,17，4，470-476
524	发泡绝热液氮传输管道绝热层导热系数的测量	吴姮，徐冬，龚领会，徐向东，李来风，杨汝平	低温工程	2008 4 42-46
525	固体材料低温热导率测试系统	许雯，黄荣进，李来风	低温工程	2008，2，32-36
526	基于Fluent的热声异形谐振管压比研究	孙生生，张富珍，宋福元	低温工程	2008, 1，14-18
527	热声系统内交变流动特性的理论分析	张富珍，李青，孙生生，胡忠军	低温工程	2008, 5，11-15
528	热声系统内交变流动特性的数值模拟	孙生生，张富珍，李青，李正宇	低温工程	2008,4, 6-10
529	氦气液化100周年回顾	张亮,李静,熊联友	低温工程	2008，5，1-6
530	交变流动热机的介观热力循环理论——第三部分：回热器与换热器的热交换	胡剑英，罗二仓	低温工程	2008, 6, 1-7
531	超导除铁器二元电流引线设计及实验研究	马文彬，朱自安，刘立强等	金属矿山	2008，10，76-80
532	紧凑式低温热交换器试验台测量系统	李静,熊联友,汤建成,张亮,刘立强	低温与特气	2008，6，16-20
533	热声发电之直线发电机的理论研究	吴张华，罗二仓，戴巍	太阳能学报	2008, 29(4), 493-497
534	激光诱导间质热疗的深低温流体冷却方法	邓中山,刘静	工程热物理学报	2008, 29, 294-296
535	蛇红外视觉灵敏性的神经学机理	肖剑,刘静	工程热物理学报	2008, 29, 1009-1013
536	热声回热器流动、传热新模型及其性能的实验表征	陈燕燕，罗二仓，戴巍	工程热物理学报	2008,29(3), 494-498
537	行波热声发动机的声功输出特性研究	李山峰，吴张华，罗二仓，戴巍，余波	工程热物理学报	2008,29(4), 545-548
538	一种新型的交变流动换热器的工作原理及实验	高波，罗二仓，陈燕燕，戴巍，吴张华，胡剑英	工程热物理学报	2008, 29(6), 923-926
539	热声斯特林发电系统的实验研究	吴张华，李山峰，罗二仓，戴巍	工程热物理学报	2008, 29(2), 195-198
540	热声压力波放大器的湍流模型及实验验证	胡剑英，陈燕燕，罗二仓，戴巍，于波	工程热物理学报	2008, 29(10), 1641-1644
541	SLX程序控制深冷箱及其应用研究	张红	热处理技术与装备	2008，29（2）,70-73
542	深冷处理及深冷处理设备	张红	五金科技	2008，36(4), 102-107
543	冷处理温度对3Cr13钢组织和硬度的影响.热加工工艺	张红	热加工工艺	2008，37(22), 64-66
544	冷处理温度对1Cr20Co6Ni2WMoV钢组织和硬度的影响	张红	材料热处理学报	2008，29(62), 62-65
545	Study on the low temperature characteristics of 2N2222A	Yu Lihong, Chen Yaoxun, Zhang Qinggeng, Huang Zan	计量学报	2008, 25 (5A), 207-209
546	低温共沸混合工质HC170/HFC23池沸腾传热实验研究	张立强,公茂琼,吴剑峰,徐烈	低温物理学报	2007, 29(1), 38
547	高频热声驻波发动机性能的实验研究	张晓东，余国瑶，朱尚龙，戴巍，罗二仓	低温与超导	2008，36（4）, 40-44
548	脉冲管制冷机调相机构的研究---第一部分：双向进气模式的研究	胡剑英，戴巍，罗二仓，任嘉	低温与超导	2008，36（1）, 1-5
549	脉冲管制冷机调相机构的研究---第二部分：惯性管有/无气库的研究	胡剑英，戴巍，罗二仓，任嘉	低温与超导	2008，36（9）,5-10
550	脉冲管制冷机调相机构的研究---第三部分：惯性管调相能力研究	胡剑英，罗二仓，戴巍，任嘉	低温与超导	2008，36（10）, 9-13
551	R23＋R116系汽液相平衡的测量与数据拟合	张宇，公茂琼，吴剑峰	化工学报	2008，59, 269-275
552	超低成本体温记录卡及其初步应用	韩萌，王欣，刘冉，刘静	北京生物医学工程	2008, 27(4), 409-412,
553	《肿瘤热疗物理学》	刘静,邓中山	北京：科学出版社	2008
554	《热学微系统技术》	刘静	北京：科学出版社	2008
555	高温超导应用	李来风完成撰写了该书第五章	上海科学技术出版社出版	2008
556	走进材料科学	Rober W. Cahn著杨柯等译,李来风翻译第7章	化学工业出版社	2008